What do the Lights on the Ankle Monitor mean?

What do the Lights on the Ankle Monitor mean?

What do the Lights on the Ankle Monitor mean?

It is important to note that three primary colors have very different functions in ankle monitoring and the different types of ankle monitoring. The green, red, and yellow lights serve another purpose and signal the monitor.

Sometimes it tells us why the monitor is lightening up; sometimes, it suggests that it is charged, not charged, or fully charged. In short, we can say what the means of light is in an ankle monitor. Simply put, these all have different functions in different scenarios to transmit the signals.

When the red light turns on, it means the device is on. The device is looking for a GPS signal when the yellow light blinks. The yellow light will turn solid once satellite communication. The device is looking for a cellular signal when the fluctuation in green light occurs. An ankle monitor uses GPS to transmit the wearer’s position to a surveillance system. Trying to uproot raises a red flag with law enforcement. Suppose the perpetrator must travel outside a predefined region, such as the town where he resides. In that case, an alarm is also on the main point.

Is the ankle monitor illuminated?

When the bracelet charges, the battery’s green rechargeable lights on the top will turn solid, and you can unplug the charger. You’ve effectively attached the charger when you feel a quick vibration, and the green lead on top of the bracelet starts to blink.

The ankle monitor is in full charge

The charging cable is long and should give you sufficient slack to move around the room while charging. When you set the bracelet, the green battery light on the upper edge will turn solid, indicating that you can unplug the charger.

See also  5 Best robotic vacuum and mop reviews in 2022

Red light means

it must charge the device for at least two hours per day (the hours do not have to be consecutive). When the traction battery needs charging, the gadget will pulsate three times in a row, once every 10 minutes, until the charger is connected. The energy light-emitting diode will light up red during this time. Red signs consistently denote an alarming sign when signals drop off and on.

Blue light means

The golden light turns solid once a viable fix GPS. When the green light fluctuates quickly, the device is looking for a connection to make. The device is unpaired when the light source in blue slowly blinks. The blue light turns solid once paired and connected. So the Global positioning system has a significant share in using all these lights because it is assumed as a considerable function to use these lights.

Greenlight means

When the monitor charge, the green rechargeable battery and light on top will turn solid, and you can unplug the charger. When you feel a brief sound wave and the green light on top of the bracelet begins to blink, you’ve effectively attached the charger.

Whenever the green light heats up, the tracker looks for a GPS. The green light converts into solid once it establishes satellite communication. In this color too, GPS is important to mention due to its significant role.

Ankle monitors types plus light means on all the types

There are three types of ankle monitors, namely, SCRAM, RF/Radio Frequency Ankle monitors, and GPS monitors


The SCRAM CAM bracelet samples the wearer’s moisture and tests for alcohol every half an hour around the clock in the transdermal testing. It can even distinguish between ingested alcohol and environmental alcohol source materials (such as sprays containing alcohol).

Red and greenlight function.

The charge is critically low, as shown by the blinking red light. Solid green indicates that the device is plugged into a power source. Solid yellow indicates that the battery is charging, but it is still low.

See also  How Much Does A Gallon Of Water Weigh?

Greenlight function in it

Most of the time, the bracelet will flash a green light. This light indicates that the bracelet is in contact with the base station. The green-ray may continue to blink, indicating that the router is trying to communicate with the SCRAM anklet.

2) GPS monitor

Every minute or so, the GPS receiver identifies signals from the system of GPS, providing a precise location. The data is then transmitted to a central monitoring hub via the cellular connection, providing the corrections department with a valid photo of the wearer’s movements.

Red, green, and blue-light mean in this monitoring system

When such red lights change steadily, it means the device is on. The battery pack charges whenever the red light gradually fluctuates. The yellow light can be solid once an accurate global positioning is fixed. When the green light blinks quickly, the device looks for a cellular signal.

3) RF/Radio Frequency ankle monitors

The primary purpose of RF monitoring is “curfew monitoring.” RF covers an ankle and installs a remote monitoring unit at their home. When a bracelet enters the unit’s range, the team sends an alarming alert to the monitoring center. The monitoring center is open 24 hours, 365 days a year.

Messages send, and problems detect, radio frequencies transmit electromagnetic signals in the form of light.


The red light on your ankle bracelet indicates that the device is charged. It may also suggest that you have not finished a required action, such as an internet check-in or a phone call. The red and green lights illuminate in the program officer’s office during initialization. In contrast, the yellow light illuminates whenever the monitor receives power. In this context, ‘What does light mean in ankle monitoring’ is a clear message to be sure what the colors on your device mean. Anyone can understand the functionality of different colors.

See also  Oilfield Tank Monitoring- Why is it Important?