Kindle Battery showing Exclamation Point !

So you managed to turn on your Kindle device, and you tried to charge it. But you see an exclamation point sign when you plug it in. This article will tell you the possible solutions to remove the exclamation point and bring it back to life.

Why your Kindle won’t charge

There are a couple of different reasons why your Kindle may not be charging as usual. The first thing we need to determine is whether it’s an issue with the software on your Kindle or a problem with the hardware, aka the Kindle itself.

We can usually do this by looking at the display of your Kindle. If you plug it in to charge, even with the wrong charger, you should see a dead battery screen (a battery with an exclamation mark on modern Kindles). This indicates that the Kindle software is working fine, and it is probably a hardware problem.

But suppose you can’t even get the Kindle to turn on whatsoever. In that case, this is almost definitely going to be a hardware problem. You may tell this by looking at the charging light on the bottom of the device. If it’s plugged in and there’s no light, it could indicate a battery issue.

Kindle battery Exclamation mark

The Kindle battery exclamation point means that the battery is not working correctly. You should try to reset your Kindle tablet and see if you can get rid of the error message after doing so. If the problem continues, there might be something wrong with your tablet’s hardware, which will need to be repaired by a professional.

Reasons why Kindle is showing Exclamation Point

You are using the tablet while it is charging, and it can affect your battery performance.
The tablet battery has completed its lifespan and needs to be replaced because, just like humans, batteries also have a lifespan.
Your charger’s cord might be damaged, resulting in delay or no current provided to the tablet.

Your charging cable might be broken. You should try one from a phone or other device. If the lead fits, it should work.
If your charging cable works fine, then it might be the charging brick that is causing problems. Try one from another device or connect the lead to a USB port on a computer.
Try cleaning the charging socket of your Kindle; use a toothpick to take all the dirt and grime out of the port. The dirt gets collected after some time and causes problems in charging if not cleaned regularly.

You can factory reset the Kindle- explained below.
The Kindle might have a hardware issue that is causing the problem.
A dead battery can be another reason; contact a professional to get your battery replaced. Replacing the battery is very rare only if you see that the tablet is swollen from any side.

You can try to fix or troubleshoot your Tablet’s Battery by following one of these:

You could fix it if your Tablet’s Battery has battery calibration support that it can be like the first time you bought it. However, if you want to calibrate your Tablet’s Battery Physically, you must follow the following:

Charge your tablet for 8 hours or more. It might be possible that the battery is completely drained and needs some time to get back into life.

Unplug the charger if it reaches 8 hours because excessive charging may damage the battery and cause further damage.
Turn your tablet off and Charge it again for 1 hour. It helps to calibrate the battery and may help to remove any software issue.
Unplug the charger again to see if the tablet is holding any charge or not.

Turn on your tablet and wait 2 minutes.
Turn off your tablet again and charge it again for 1 hour.
Unplug the charger again, then use it as usual again.

Try to see if your Tablet’s Battery is already back to normal again.

If you want an application to make it for you, follow the following:

Go to your GooglePlay store if your tablet is android and apple store for apple,
Search Battery Calibration.

Download it and Install it.
Run the application, then follow the instructions inside the application.

Remember calibrating your battery can be helpful if you are using your Kindle after a long time. It helps to keep your battery reading accurate and improves battery performance as well. If the calibration doesn’t help, you can bring it to the technician or a shop to check it. Remember that you can make them fix it for you if you still have the warranty for your tablet.

Try Resetting the Kindle

It’s always a wise idea to start by trying to reset your device. This is the same for most tablets, phones, and other tech products – a quick reset can often fix most problems.

You can easily do this by holding down the power button on the bottom of your Kindle for 40-50 seconds. But, first, try this while the Kindle isn’t plugged into any form of charging port (laptop or mains).

After you’ve done this a few times, it should work. If it doesn’t, then you’ll want to try the same thing while your device is plugged into a power source. It may take more than one attempt for this to work, so give it a good go before giving up. Plus, make sure that the charger port is completely clear of any dust.

Even if you aren’t quite sure why your Kindle isn’t working, it’s still a good idea to reset your device. Although it may take you a few tries to do this properly, it’s the first thing you should do if the battery won’t charge on a Kindle.

Change your charger

The most common reason why your Kindle won’t charge isn’t down to the device itself. Instead, it’s the responsibility of the charger that you’re using with your Kindle.

When you’re charging the Kindle, you want to make sure that you’re using the charger that came with it. This is easy enough if you’ve got a new Kindle, but with older ones, you may have lost the charger somewhere down the line.

If you try to charge the Kindle with a different, less powerful charger, then there’s a good chance that it’s not going to work. If it does, then it’ll probably charge so slowly that it’ll take hours for it to get enough life for you to be able to turn it on.

This can also be the case if you try to charge your Kindle by plugging it into the USB port on your computer or laptop. It hasn’t got sufficient charge for the device, especially if your computer isn’t plugged in to charge too. The charger that comes with the device is a 5 watt, 1 amp charger – the wattage is just the amperage multiplied by the voltage. Either way, if you don’t have the original charger, then at least try to use one with these exact specifications.

In most cases, this is why a Kindle battery won’t charge or just charges slowly, which damages the battery and shows Kindle Battery exclamation point.

How long does it take to Charge a dead Kindle battery?

Charging a Kindle from dead battery condition is to be done under the power adapter method, during which yellow led will glow. Considering the model that you mention is Kindle Fire HD 7, The battery capacity is 4440mAh. The charging option given is a 5W or 9W USB charging option. The charging time is from 6 to 7 hours when using a 5W charger and 3 to 4 hours when using a 9W charger. Usually, the time to charge reduces on normal charging conditions.

The same applies to Kindle Fire HDX 7. For the Kindle Paperwhite, it takes 3 to 4 hours to charge completely from the drained state. To note, a 5W charger alone can be used for this model.

Conclusion

In this article, we discussed the Kindle battery exclamation point and the problems it might have. However, some possible solutions can help you remove the exclamation sign and bring your tablet back to life. You can try resetting the tablet, changing your charger or cable, cleaning your charging port from dirt and grime, calibrating your battery, or if all fails to replace your battery with a professional.

The exclamation point indicates that the battery is not connected correctly and needs to be fixed. Next, we discussed the issues where the problem could be and also discussed its solutions.